Tryg Exterior Ceiling - Discreet Lens
SEC12230 51.70 in
Tryg Exterior Ceiling - Discreet Lens
This IP66 rated fixture combines a stylish design with outstanding durability that’s important for exterior applications. Designed to perform, Tryg can deliver up to 1,150 lumens per foot, providing ample illumination for your project. Its housing acts as an efficient heat sink, maximizing output and life by allowing the LEDs to operate at an optimal temperature. A low profile keeps Tryg’s presence discreet. Available in continuous runs.
Tryg Exterior Ceiling - Discreet Lens SEC12230

Start building your product.

Specify your options and generate a personalized spec sheet.


  • IP66 rated fixture with robust construction is certified as dust-tight and protected against power water jets
  • Low profile of less than 2"
  • Frosted acrylic shield enhances the environment with diffuse illumination
  • Anodized finish provides optimal thermal effectiveness and durable corrosion protection
  • All visible fasteners are flush mounted, providing a clean design
  • Matching wall sconce available
  • Handcrafted in USA


  • LIGHT SOURCE: White LED light engine
  • CRI: 80+ or 90+
  • LUMEN MAINTENANCE: L80 = >60,000 Hrs at 38°C ambient temperature
  • EFFICACY: 82 lm/W delivered
  • CCT: 2700K, 3000K, 3500K, 4000K, 5000K
  • DRIVER: Includes remote Class 2 power supply and either a damp location or wet location enclosure. Black weatherproof power cord with watertight fittings. 36" lead length standard.
  • DIMMING: 0-10V controls standard to 1%
  • CONTROLS: Contact factory for control options (e.g., Lutron Athena, Current NX, nLight, Enlighted, Encelium, Wattstopper, WaveLinx, or Casambi).
  • EMERGENCY: Remote battery option is provided with 10W Constant Power Battery back-up, providing 90 Minutes of Emergency operation.  Contact factory for other Emergency options.
  • CONSTRUCTION: Extruded aluminum housing
  • FINISH: Available in anodized finishes only. Mounting components are painted to match.
  • MODIFICATIONS: Consult factory for all modification requests; including stem mounting or other lengths
  • APPROVALS: ETL listed to UL standards (US and Canada) for use in wet locations. IP66 rated fixture per International Electrotechnical Commission (IEC) certifies fixture as dust-tight and protected against powerful water jets.


5 in
12.7 cm
1.9 in
4.8 cm
49.7 in
126.2 cm
50.2 in
127.5 cm
51.7 in
131.3 cm
Mounting Weight
Approximate: 25 lb (12 kg)
Your Configuration:
--None --

Required Field *

Please Note: Default specifications "DF_XXX" will not appear in the ordering code.


Job Name:


To ensure color consistency, SPI uses precise bin selection and strict quality processes to maintain a 3-step (MacAdam) SDCM on all white LED lampings. Published LED luminaire wattages are calculated using a typical power supply efficiency of 88%; exact wattages may vary based on application. Alternate wattages available upon request.

L16W | White 16W LED Light Engine

Delivered Lumens: 1,314
L28W | White 28W LED Light Engine

Delivered Lumens: 2,299
L56W | White 56W LED Light Engine

Delivered Lumens: 4,598

Voltage *

120-277V | Universal Voltage  

Lamp Options *

Apply multiplier from chart for delivered lumens at other CCT’s and CRI’s.

2700K | 2700K CCT  
3000K | 3000K CCT  
3500K | 3500K CCT  
4000K | 4000K CCT  
5000K | 5000K CCT  


DF_80 | (default)  

Mounting *

Contact factory for stem mount.

FBK | Fixed Bracket  


Remote Power Supply Enclosure *

PSE | Remote Power Supply with Damp Location Enclosure  
PSE-NONE | Remote Power Supply without Enclosure  
PSE-WL | Remote Power Supply with Wet Location Enclosure  

Linear Run

Select this option only for runs longer than 4'. INSTALLATION NOTES: During installation the contractor is responsible for using the actual fixtures to ensure accurate mounting centers from one fixture to the next along the length of the run.

RUN | Continuous Run  
OAL | Specify Length of Run


10W, Constant Power Battery Back-up, with 90 minutes of emergency operation. EMR will be included in enclosure specified above. When specifying EMR with RUN, the first fixture in the run will be the emergency unit.  If other or different Emergency units are needed, contact factory.  Additional Power feed location will be required to power non-emergency sections.

EMR 1 | Emergency Battery Remote  

1 EMR not available with PSE-NONE

Color Accents

Specify an optional painted Color Accent for the narrow band between end cap and extrusion.

CA01 | Color Accent  



F | Fusing  

Request a modification